Linear Guideway Cooling and Waste Box CNC Milling Machine For
Machining Metal Castings Plumbing Fittings Products
Advantage
1. Each piece of the cover can be connected with the same movement,
which is completely different from the general cover and one piece
pulls, so the noise is extremely low;
2. the use of the device's shield can increase the service life;
3. The steel shield device can increase the moving speed of the
shield to 120m/min and withstand a higher G value (2G);
4. the steel plate shield device makes the shields move and
parallel (avoid the general shear force shield is still a
shortcoming of snakes);
5. can be more stable at high speed, no vibration.
Specifications
| Type | unit | DHVMC-850 |
| Table | Table size | mm | 1000*500 |
| Max. load of worktable | kg | 400 |
| T slot no./width/distance | mm | 18x5x90 |
| Travel | X axis travel | mm | 800 |
| Y Axis travel | mm | 500 |
| Vertical travel | mm | 500 |
| Spindle | spindle nose to table surface | mm | 150-650 |
| Spindle driver | - | Belt transmission |
| spidle axis to column surface | mm | 572 |
| Speed Range | rpm | 10,000 |
| Spindle head casing aperture | mm | φ140mm |
| Spindle taper | Type | BT-40 |
| Auto tools change | Maximum tool diameter | mm | Φ80(Φ130) |
| Maximum tool length | mm | 300 |
| Maximum tool weight | kg | 8 |
| Shank | Type | BT-40 |
| Tool magazine capacity | Pieces | 24 |
| Tool exchange method | - | Knife arm |
| Tool exchange time (knife-to-knife) | Sec | 1.8 |
| Rivet | Type | P40-1( 45°) |
| Motor capacity | Controller | | Syntec 22MA |
| battery capacity | kVA | 25 |
| Servo motor (X/Y/Z) | kW | 2.6/2.6/3.0 |
| Cutting fluid pump | w | 840 |
| Spindle motor (continuous / 15 minutes) | kW | 7.5/11 |
| Automatic lubrication device | w | 35 |
| Others | Air source pressure demand | kg/cm | 6 |
| Cutting water tank capacity | L | 250 |
| positioning accuracy | mm | 0.01 |
| Repeatability accuracy | mm | 0.008 |
| Floor area and height | mm | 2550*2250*2400 |
| Machine weight | kg | 5000 |
Machine Details
Auto Chip conveyor
The device has the advantages of serialization, generalization and
standardization, simple operation, reliable operation, convenient
disassembly and assembly, and easy maintenance. It can also be used
in conjunction with other chip evacuation devices to form a variety
of cutting arrangements.
1. It can handle all kinds of chips; it can also be used as a
conveying device for small parts of stamping and cold pier machine
tools.
2. High conveying efficiency and large selection range of conveying
speed;
3. The width of the chain plate is diversified, and the structural
form is divided into two types: a seamless chain plate and a seam
chain plate. 4, streamlined shape, beautiful appearance, smooth
chip removal;
4. With overload protection.
Oil cooled system for spindle
1. Oil temperature control is based on the body temperature (room
temperature). The user can set the oil temperature according to the
temperature of the body to prevent thermal deformation of the
mechanical structure.
2. Immersed oil cooling and temperature control device is free from
impurities, is not interfered by cutting metal powder, etc. It is
easy to clean and easy to maintain; it is easy to install and does
not take up space.
3, with automatic fault alarm function, can promptly remind the
user to repair the device in a specific way, so as to avoid damage
to the machine.
Automatic lubrication system
The automatic lubrication system solves the machine fault caused by
the frequent lubrication in the long-term use of the machine, and
has the lubrication system alarm function. The lubrication method
is simple and reliable, and the oil lubrication and circulation
time can be automatically adjusted according to the working state
of the machine tool to save lubricating oil. It is automatically
lubricated at start-up and can be lubricated according to the time
interval set by the user. The automatic lubrication system is
designed with overload detection, oil level detection and pressure
detection to prompt the operator to stop the inspection.
Auto Chip conveyor
The device has the advantages of serialization, generalization and
standardization, simple operation, reliable operation, convenient
disassembly and assembly, and easy maintenance. It can also be used
in conjunction with other chip evacuation devices to form a variety
of cutting arrangements.
1. It can handle all kinds of chips; it can also be used as a
conveying device for small parts of stamping and cold pier machine
tools.
2. High conveying efficiency and large selection range of conveying
speed;
3. The width of the chain plate is diversified, and the structural
form is divided into two types: a seamless chain plate and a seam
chain plate. 4, streamlined shape, beautiful appearance, smooth
chip removal.
4. With overload protection.
FANUC Spindle motor
High performance AC spindle motor with excellent basic performance
High processing performance
The optimized winding design and high efficiency cooling structure
provide the motor with robust and agile acceleration in high speed
areas.
By increasing the rated power and torque for a short period of
time, the heavy cutting capability in a short time is enhanced,
thereby shortening the acceleration and deceleration time.
The new through-hole model allows for central through-cooling, with
air-cooled and liquid-cooled series.
High mechanical precision and low vibration characteristics for
direct connection to the spindle.
With a maximum power of 200 kW and a maximum torque of 2000 Nm, it
is suitable for large machine tools. The technology of driving
several axes with multiple standard amplifiers to drive one axis
can further address the need for high power.
Through the spindle control technology independently developed by
FANUC, it can output the same S6 rated power as the rated power of
S3.
