Cutting Coolant System Three Color Alarming Lamp Cnc Vertical
Machining Center For Sanitary Ware
Advantage
1. Machine frame with linear guides in an extra-wide configuration,
Robust construction for efficient machining;
2. Linear guide system for rapid feeds up to 10 m/min;
3.Funnel type 20-station tool changer for quick and precise tool
changes (as Optional);
4. Chip conveyor and purge system for optimum chip removal;
5. Easy accessibility of work table for easy setup and tooling;
6. High-accuracy preloaded ball screws on all 3 axes.The 4th axis
is optional;
7. Enclosed work space ensures safe and contamination-free work;
8. Operating system: Mitsubishi, Fanuc and Siemens;
9. Could mill steel,copper,aluminum,wood and plastic etc;
10. mainly applicable to processing board, plate, shell mold and
small complex parts;
11. can continuously complete
drilling,milling,tapping,reaming,expanding and other processess at
one clamping.
Specifications
| Type | unit | DHVMC-850 |
| Table size | mm | 1000*500 |
| X axis travel | mm | 800 |
| Y Axis travel | mm | 500 |
| Max. load of worktable | kg | 400 |
| T slot no./width/distance | mm | 18x5x90 |
| Vertical travel | mm | 500 |
| spindle nose to table surface | mm | 150-650 |
| spidle axis to column surface | mm | 572 |
| Maximum tool diameter | mm | Φ80(Φ130) |
| Maximum tool length | mm | 300 |
| Maximum tool weight | KG | 8 |
| Speed Range | rpm | 10,000 |
| Spindle taper | Type | BT-40 |
| Spindle head casing aperture | mm | φ140mm |
| Spindle driver | - | Belt transmission |
| Shank | Type | BT-40 |
| Tool magazine capacity | Pieces | 24 |
| Tool exchange method | - | Knife arm |
| Tool exchange time (knife-to-knife) | Sec | 1.8 |
| Rivet | Type | P40-1( 45°) |
| Controller | | Syntec 22MA |
| Spindle motor (continuous / 15 minutes) | kW | 7.5/11 |
| Cutting water tank capacity | L | 250 |
| Repeatability accuracy | mm | 0.008 |
| positioning accuracy | mm | 0.01 |
| Servo motor (X/Y/Z) | kW | 2.6/2.6/3.0 |
| Automatic lubrication device | w | 35 |
| Cutting fluid pump | w | 840 |
| battery capacity | kVA | 25 |
| Air source pressure demand | kg/cm | 6 |
| Floor area and height | mm | 2550*2250*2400 |
| Machine weight | kg | 5000 |
Machine Details
Fully enclosed tool magazine
the processing environment is noisy and it is not easy to enter the
iron filings. Guarantee the service life of the tool magazine,
reduce tool change failure, extend the service life of the spindle,
and ensure the precision of machining.
FANUC Spindle motor
High performance AC spindle motor with excellent basic performance
High processing performance
The optimized winding design and high efficiency cooling structure
provide the motor with robust and agile acceleration in high speed
areas.
By increasing the rated power and torque for a short period of
time, the heavy cutting capability in a short time is enhanced,
thereby shortening the acceleration and deceleration time.
Amplifier for driving servo motors and spindle motors;
A stand-alone structure makes it easy to achieve an optimized
combination of amplifiers based on power supply capacity;
High processing performance;
Equipped with intelligent rigid tapping function that is effective
in shortening processing time.
Auto Chip conveyor
The device has the advantages of serialization, generalization and
standardization, simple operation, reliable operation, convenient
disassembly and assembly, and easy maintenance. It can also be used
in conjunction with other chip evacuation devices to form a variety
of cutting arrangements.
1. It can handle all kinds of chips; it can also be used as a
conveying device for small parts of stamping and cold pier machine
tools.
2. With overload protection;
3. The width of the chain plate is diversified, and the structural
form is divided into two types: a seamless chain plate and a seam
chain plate. 4, streamlined shape, beautiful appearance, smooth
chip removal.
4. High conveying efficiency and large selection range of conveying
speed.
Hiwin rail
Due to the rolling friction method, when the linear guide is used
as the linear guide, not only the friction coefficient is reduced
to 1/50 of the sliding guide, but also the difference between the
dynamic friction and the static friction is small. Therefore, when
the bed is running, there is no slippage, the positioning accuracy
of μm can be achieved, and the machine can maintain the accuracy
for a long time. The power loss of the machine can be significantly
reduced, and the heat generated by the friction is small, which is
suitable for high-speed operation. The special beam structure
design can bear the load in the up, down, left and right directions
at the same time. Easy to assemble, it maintains accuracy and is
interchangeable, allowing you to replace sliders or rails or even
linear guide sets. The lubrication structure is simple and easy to
oil.
High operating rate
With unique sealing technology, it has good waterproof performance.
Optional protection level is IP6r model
easy to use
It is equipped with a bayonet socket to make cable installation
cheaper.
The product contains 200V and 400V power supply specifications for
customers to choose
The steel plate shield
has a good seal and can prevent iron filings, anti-cooling liquid
and anti-tool accidents.
1. Sturdy and durable, stable operation, low noise and beautiful
appearance;
2. On the basis of the original sealing strip, a layer of stainless
steel cover is added to prevent the high temperature burn strip of
iron filings from rubbing into the rail surface and pulling the
guide rail;
3. Steel plate shield is suitable for high-speed motion machine
tool rail protection is stable and no vibration noise;
4. The steel plate cover device not only protects the service life
of the guard plate, but more importantly ensures the precision of
the machine tool;
5, the steel plate shield will not make the guard plate disjointed,
there is impact sound, both beautiful and improve the service life
of the guard plate;
6. Each guard plate of the steel plate shield is pulled apart in
parallel at the same time, and is simultaneously retracted in
parallel, and runs freely.
Triaxial slide rail retractor
The machine guard is used to protect the machine guide rails. He
protects the machine's internal hard rails, linear guides and ball
screws or drive racks from external corrosion and damage. It can
effectively prevent the entry of chips and other sharp objects, and
can effectively reduce the penetration of coolant through certain
structural measures and suitable scraping plates.
The steel plate shield has a good seal and can prevent iron
filings, anti-cooling liquid and anti-tool accidents.
1. Sturdy and durable, stable operation, low noise and beautiful
appearance.
2, steel plate shield is suitable for high-speed motion machine
tool rail protection is stable and no vibration noise.
3. The steel plate cover device not only protects the service life
of the guard plate, but more importantly ensures the precision of
the machine tool.
4. Each guard plate of the steel plate shield is pulled apart in
parallel at the same time, and is simultaneously retracted in
parallel, and runs freely.
5, the steel plate shield will not make the guard plate disjointed,
there is impact sound, both beautiful and improve the service life
of the guard plate.
6. On the basis of the original sealing strip, a layer of stainless
steel cover is added to prevent the high temperature burn strip of
iron filings from rubbing into the rail surface and pulling the
guide rail.
